Видео

Looks like you fall to mention in the fuse box. The load and your draw side. You know fuse has a draw side. The side that everyone use and the attachment fails. Not everyone is an expert!!!!!

Here's a question for ya regarding a car i just finished bagging. I daily my car all spring, summer, and fall, but I park it in the winter. When it's parked for cold months, what is the best practice to prep and store it? Should I store it aired up, aired out, do I need to flush the system? I know I have to prep my sprinker system, and would love to know if my car is the same way.

Hi I’m on airtekk struts and when I go over a bump I hear a noise on the rear struts. When I raise the psi on the rear the noise I hear when going over bumps goes away but when I lower the psi the clunk returns. How can I fix this? Thanks

Can I ask a question? I am building a sports car, 50's look from scratch. I don't want a tank and a pump, and so much complication, could I use air springs with a schrader valve, and simply pressurise to how I want it and done? It seems a perfect idea. If not its a case of weighing each corner and purchasing coil springs to suit.

I loved the part where he said check your specs before you buy Nice.

That fly was just chillin...

he proud of me...

So I turn on my compressor settings and somehow it turns off when I go back to main menu? Why ?

Элегантная. 😎

Is this plug and play or do you need to buy something else to make it work?

How the hell did you clear the bolt in the rear well that holds the rear bar on! That thing looks mint

My passenger side bag only leaks while the car is moving. When it’s parked and not moving everything is good.

Where can i buy a replacement bag?

Gangsta AF.

Straight piping an LS400 is just vile. It is obnoxiously loud, tasteless, and doesn't fit the car's character. This engine deserves NO LESS than a custom exhaust. Look at the exhaust which "I_am_girlwelder" made. Now THAT'S the exhaust it needs😤 Other than that it looks like a good build 👍

is the process the same for my performance series bags with the integrated bearing? I ant find any videos on it.

my damper is stuck on and won’t twist off, any tips?

Are these a new type of bearing or the same bearings airlift has been using.

Not sure if this is a major or minor issue but my bags need around 60psi just to start lifting the front. I have max load which is a good brand but maybe it’s something with the wiring. I have no leaks and rears are perfect.

Don't buy this stuff...they take your money and don't send the kit

I try to explain this to people but they don’t understand. I’m just going to send them this video 😂😂

Can you guys do an installation of the management?

Hey man, I bought a car with bags but no remote. I bought a new one but always says ecu no found and the settings won’t open when I press the middle and up arrow button

But it drains your batt below 12v...😢

what if i only have a 10 amp ignition power but my thing needs 20

Land Rover used "ride height" for presets instead of pressure.

When i first got bags the company Vera just released their setup, in like 2017ish. Truhart air struts look just like these in the video, the management i had was pressure based with the front two lines connected to eachother and same for the rears. Eventually got 4 corners to be on individual pressure but understood then that the amount of psi had nothing to do with height. Then upgraded again with their height sensors and they look like some universal tie rods, and during heavy rain one would stop responding. Eventually i had a different shop install airlift 3H management combined with the Truhart airstruts i already had, never had any issues at all since, I wish i understood everything sooner before the install. My first bag went bad a couple months ago after 7 long years of wear and tear, its quite the effort to replace the sleeve but time and patience pays off. Not sure if you guys have a video on replacing sleeve bags, i recall having a hard time finding a clear video on demonstrating the process, if you havent it would be a nice suggestion to help anyone who doesn't have an idea in the future

If air backfeeds will it cause your aripressure to drop? If air backfeeds it will go back into compressor making it harder/difficult to find a leak? I dont live in cold weather, actually extremely hot sun FL... I do drain my tanks weekly. Help on sugestions... might need to try new replacement SMC valves...

I have a 2006 mustang GT and I have Maxpeeding rods coilovers, but they ride rough if I put bags one them will it soften up the ride? And also how low will I be able to if I’m aired out fully?

My exact issue with my evo x . Rolling sleeve bags are used in the rear. Always have to shoot 100psi into the bag to actually lift the var beyond the point I want. Then manually dump the air to get the pressure and ride height I want. Oh well, sacrifices 😅

Looking for a 1/8 npt port water trap... Do you have any anything available in that size because I only see 1/4 npt and 3/8 npt.

Some good points there. Thanks...

That goes harddd 🔥🔥

The visuals are wild. Like a moving picture.

Always delivering 🔥

i have bc coils but they’re 16k and 18k spring rate, will they work or is it going to be bouncy and stiff or is that only my springs

Nice ride bro love my z

Hey man! Quick question, if we drain the tank from the water traps, do we need to directly drain the tank as well ? My installer made a setup where the valve is placed in the middle of the tank so I can only drain the half of it from there. Or I did it in a wrong way? That said, while pressing the water traps, it drained the whole tank. The pressure was near 0 but I dis not press till the end. Does it work to drain the whole tank from there once every 2 weeks without touching at the tank itself ?

Hey Finn from bag Riders what do you think is the problem for my truck it keeps blowing a fuze on the switch I installed that goes to my relay let me know your thoughts on why that happens I don't quite understand it to well yet but I want too ?

For a 1500kg (3300lbs) car should I use 1/4 or 3/8? 🤔

Do you have link for tein flex z pillow ball?

Came here for the dislike 👎🏽 button lol looks clean, just not my style.

tragic 🤣

Do you guys have a video on replacing fitting on manifold?

SHEESH! Bagged S550s go hard

Can u pls help me iam facing a issue like i also have to crank 4-5 times in morning and the engine even produce weird noise like misfires (even in summer ) and whenever i park my car for 3-4 hours and after that when i try to start my car i have to crank 3-4 times but during the day when engine is bit hot after running there is no such issue and car starts immediately in half crank

Fyi, softening up your damper adjustments can potentially get you to your preset height slightly better. When stiffening up the dampers, the management's "brain" will think it has already hit its preset pressure "too soon".

Wow, that looks stupid!

So you have to have the ecu AND manifold. Thats pretty lame. Airlift has everything integrated into one unit.

I have a large leak coming from the small holes on manifold above a connector. What causes that